FX-Spider pulse measurements

Guide on connecting a pulse measurement to Fidelix FX-Spider controller

When connecting a pulse measurement to FX-Spider the digital inputs SI8 - points 1-8 should be used. These inputs are fast and therefore can be used in pulse measurements.

When programming the pulse measurement points, the points are linked to the Spider module at address 1 and to points 31-38. These points are the same as in the module SI8 at address 5 and when linking the point to either the Spider module or the SI8 module, the point will show at both locations.

 

When connecting the pulse measurement the connection will be done between the measurement point which is connector E1 - E8, depending on which point 1 - 8 the measurement is linked to, and connectors I1 - J8, which are connectors connected to common ground.