multiLINK firmware updating

Updating the firmware via FTP-connection

 

The firmware can be updated via FTP as follows:

  1. Download the newest firmware from here:
    Senaste programversionerna
  2. Take FTP-connection to multiLINK, example using Filezilla-software.
    Default IP: 10.100.1.97, Network mask: 255.255.255.0, Gateway/DNS: 10.100.1.1.
    NOTE! You have to set your computer to same IP-network. (Same setting than above, but use different IP-address for your computer)
  3. Set the connection settings in Filezilla "File" -> "Site manager" and use following:

    Username and password can be found in the same place as firmwares.
  4. Download new firmware-file to multiLINK.
  5. Reboot the device.
  6. Checking current version: Go to multiLINK IP-address in your browser, current software version can be found in settings: