multiLINK
      Back to home
      1. Knowledge Base
      2. FAQ
      3. multiLINK

      multiLINK firmware updating

      Updating the firmware via FTP-connection

      The firmware can be updated via FTP as follows:

      1. Download the newest firmware from here:
        Latest Programversions
      2. Take FTP-connection to multiLINK, example using Filezilla-software.
        Default IP: 10.100.1.97, Network mask: 255.255.255.0, Gateway/DNS: 10.100.1.1.
        NOTE! You have to set your computer to same IP-network. (Same setting than above, but use different IP-address for your computer)
      3. Set the connection settings in Filezilla "File" -> "Site manager" and use following:

        Username and password can be found in the same place as firmwares.
      4. Download new firmware-file to multiLINK.
      5. Reboot the device.
      6. Checking current version: Go to multiLINK IP-address in your browser, current software version can be found in settings: