multiLINK
      Back to home
      1. Knowledge Base
      2. FAQ
      3. multiLINK

      multiLINK versions

      The multiLINK has many different versions, characteristics, and possibilities. Here an overview of what exists

      The multiLINK communication module has a base version, upon which several extensions can be activated or installed:

      • The base version always has following properties:
        • 1 serial port for Modbus RTU over RS485 communication
        • 1 LAN port
        • the possibility to consult and change parameters & settings of the network port, as well as the serial port(s) on the embedded HTML-pages.
      • There are two extension slots onto which extension cards can be installed.
        Currently, we have 2 different extension cards available:
        • a Modbus extension card
        • an M-Bus extension card
      • The multiLINK can be equipped with what we call WEB-properties. These WEB-properties  mean 3 things:
        • independent polling of slaves (so no external master needed per se)
        • Modbus TCP capabilities
        • freely customisable web pages (HTML)
        The WEB-properties can only be activated in our production facility in Finland. 

      An overview of all different available versions:

      Product code

      		 BASE

      WEB

      Extension slot 1

      Extension slot 2

      Modbus

      M-Bus

      Modbus

      M-Bus
      MLINK x          
      MLINK-R1 x   x      
      MLINK-R2 x   x   x  
      MLINK-R1-M1 x   x     x
      MLINK-M1 x     x    
      MLINK-M2 x     x   x
      MLINK-W x x        
      MLINK-W-R1 x x x      
      MLINK-W-R2 x x x   x  
      MLINK-W-R1-M1 x x x     x
      MLINK-W-M1 x x   x    
      MLINK-W-M2 x x   x   x