![Logo_Fidelix-1.png]](https://support.fidelix.com/hs-fs/hubfs/Logo_Fidelix-1.png?height=50&name=Logo_Fidelix-1.png){kind=logo}
FAQ - Databank
Vanliga Frågor
FX Controller
- FX controller lookup tables
- Klockinställningar FX-centralenheter
- FX controller measurement point raw value
- BACnet påverkar tidkanalernas funktion
- FX controllers history data send
- Voltage measurement of low current devices
- Sensor table examples / Conversion tables
- OpenPCS version 6.7.4
- FX-Editor FX202x project to FX3000-C
- Tosibox Readiness 4G käyttöönotto
- multiLINK remotely connect
- FX controller runtime point
- Bacnet in Fidelix CPU to CPU point communication
- BACnet data from remote systems
- Globala punkterna i Fidelix PLC
- FX controller time schedule exeption days
- Windows CE memory fragmentation
- keyboard error in FX-2025A ja FX-Spider rev.2
- FX-Spider pulse measurements
- Delay settings in DO and DI points in IEC
- Visio display pixel density
- OUMAN OUFLEX logiikan hälytyksien rekisterit sisältävät lisätiedot jotka on käsiteltävä erikseen:
- TACHO / Open collector pulse -> DI-module
- FX controller user accounts reset
- Spider DO8, Classic DO8 or Combi36 module relay 8 problem
- BACnet commissioning
- Allow remote access with Windows CE browser
- FX controller history recording
- FX-controller recommended network settings
- Alarm point is in "Limited" mode?
- PID regulator operation in Multi24 and FX substation
- MBus commissioning at FX controller
- FX-Controller remote connection
- Telnet / FTP-password reset in Fx controller
- FX controller time schedules holidays
- Backup av FX-centralenhet med UpdateTool
- UpdateTool thru FX-3000-C updating
- UpdateTool thru FX controller IP-address change
- Synkronisering mellan FX-PLC:er
- FX-Spider (FX2025) ändrad skärmupplösning
- Hur man kan lägga till en datapunkts till-/frånslagsfördröjningar i HTML
- FX controller energy reports
- Substations USB-RS485 -serial converters
- FX-Editor, FX-controller updating
- FX controller sun clock
- MultiLink ports configure to one on the FX controller port
- FX controller menu to show all the time
- alarm forwarding by SMS message